Hart To Modbus Gateway Manufacturer,Hart To Modbus Gateway Supplier

Product Description

The HRT-710 / HRT-310 Gateway is specially designed for the master device of HART protocol. It allows the Modbus master to access the HART devices. These HART devices may be a transmitter, an actuator and so forth. In addition, we also provide the software utility, HG_Tool, for module configuration and HART device diagnosis. By using these modules, users can integrate their HART devices into Modbus network easily and quickly.

Features :-

Support HART Short/Long frame
Support HART Burst mode
Allow two HART Masters
Working in point-to-point or multi-drop HART mode
Connecting up to 15 HART modules
Support Modbus RTU and ASCII format
Support Modbus Slave mode
Support firmware update via Com Port. (FW_v1.2 and HW_v1.2)
Support on-line replacement of HART devices. (FW_v1.5)
Support acquire Long Frame Address automatically (FW_v1.5)
Isolated COM Port : RS-232/422/485
Provide LED indicators
Built-in Watchdog
DIN Rail or Wall Mounting

Applications :-

Industrial Automation
Factory Automation
Process Automation
Etc

Specification :

Hardware
Watchdog	Watchdog IC
ESD Protection	4 kV class A
UART Interface
COM 1	RS-232(3 wire)/RS-422/RS-485
COM 1 Connector	9-pin screwed terminal block
Baud Rate (bps)	1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Protocol	Modbus RTU / Modbus ASCII
HART Interface
HART Channel	1
HART Interface	2-pin screwed terminal block
HART Device	2-wired or 4-wired HART devices
HART Topology	Point to Point or Multi-Drop
HART Data	Only Digital Data
HART Frame Type	Short and Long Frame
Burst Mode	Supported
Max. HART Device	15
Loop Resistor	250 Ω resistor by Jumper
Isolation	Follow UL1577 Spec.
Power
Power supply	Unregulated +10 ~ +30 VDC
Protection	Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption	1W
Mechanism
Installation	DIN-Rail or Wall Mounting
Dimensions	72 mm x 35 mm x 121 mm (W x L x H) Detail
Environment
Operating Temp.	-25^oC ~ +75^oC
Storage Temp.	-30^oC ~ +85^oC
Humidity	5% ~ 95% RH, non-condensing